Skip to main content
You have permission to edit this article.
Edit
Farm worker shares story of planting safety hazard

Farm worker shares story of planting safety hazard

  • Updated
Powerline across field

To stay safe around overhead power lines, start by making sure everyone knows to maintain a minimum 10-foot clearance from power lines.

SPRINGFIELD, Ill. — Farm equipment has become more massive and technologically advanced over time. While these welcome improvements help farmers cover more ground in less time, taller equipment and longer extensions may bring added challenges around power lines.

As farmers prepare to enter the fields for planting, Safe Electricity urges everyone working in the agricultural field to be alert to the dangers of working near overhead power lines, poles and other electrical equipment.

Cody Conrady

Cody Conrady was injured when a sprayer boom made contact with a power line.

In a news release, the group shared electrical accident survivor Cody Conrady’s experience.

It was Cody’s next-to-last day as an assistant manager for an ag fertilizer company. They were understaffed that day, and Cody jumped in the truck to get ahead of the sprayer. Once the sprayer was in position, he hopped out to fill the tank with fertilizer.

He and his co-worker inside the cab were unaware that the sprayer boom had either made contact or gotten too close to a power line. Suddenly, 7,400 volts of electricity traveled through the boom and electrified the equipment and ground where Cody was standing. The stray voltage considered Cody’s body as part of its electrical path to ground.

In the minutes and hours that followed, Cody was brought back to life, rushed to a local hospital, and then transferred via Medivac to a Level 1 trauma center. That was the starting point to a very long and arduous road to recovery that included many surgeries, rehabilitation and prosthetics fittings.

“Pay attention a little more (when working near power lines),” Conrady now says. “Keep an eye on your surroundings. Take an extra second to look at things to see how your situation is going to unfold.”

Conrady drives by fields buzzing with activity during active farm seasons and wonders if others see what he sees — if they realize the potential dangers of getting too close to power lines.

His wife, Bailey, says this type of accident could happen to anyone. Unintended contact happened in an instant, but its impact lives on long after an accident.

“We knew life wasn’t going to be the same,” Bailey says. “We knew that the ‘normal’ before was not going to be the ‘normal’ after.”

To stay safe around overhead power lines, start by making sure everyone knows to maintain a minimum 10-foot clearance from power lines.

This 10-foot rule applies not only to the area underneath the power line, but to the full 360 degrees around it. Not only can electricity change paths if direct contact is made, it can also happen when someone or something gets too close to a power line and the current jumps, also known as arcing.

In addition to the 10-foot rule, take these steps to help decrease the chances of an electrical-related incident:

  • If your machinery or vehicle comes in contact with a power line, do not get out of the cab because you could be electrocuted. Instead, stay where you are and call 9-1-1 to dispatch the appropriate utility to deenergize the power.
  • If it is not safe to stay in the cab due to fire or smoke, make a solid, clean jump with both feet landing at the same time. Hop away with feet together as far as you can.
  • If you come across an accident or incident near a downed power line, alert individuals (from at least 50 feet away) to stay in the cab or vehicle as long as there is no imminent danger. Call 9-1-1 and do not approach the scene.
  • Have a daily meeting with staff to go over possible hazards. Map out and review routes where equipment will be moved and ensure it will clear power lines.
  • Teach anyone working with or for you (including family members and seasonal employees) about power line awareness and proper clearance distance.
  • When working around power lines, always use a spotter who has a broader vantage point than the person in the cab.
  • Visually inspect overhead lines, which may not meet height codes due to age or pole damage. If a wire is hanging low, never try to move it; instead, contact your electric utility for assistance.
  • Lower extensions to the lowest setting when moving loads.

CropWatch Weekly Update

* I understand and agree that registration on or use of this site constitutes agreement to its user agreement and privacy policy.

Related to this story

Most Popular

Find the equipment you're looking for

Get up-to-the-minute news sent straight to your device.

Topics

Breaking News