1-4-19 Whats This number 9 cream separator part

Gerard Weber of Princeton, Kan., has been mulling over the mystery of this object for many a year.

This photo shows a round metal object with the flat bottom screwed into a piece of wood, possibly a 1x10 or 2x10, 17 inches long. The piece of metal has an oval hole that shows some of the wood grain. The base on one side is bent at a 90 degree angle and could be about a quarter inch thick. The circle inside the base is maybe an inch deep and possibly made of a thin piece of tin, and secured after wrapping around two posts.

It would appear to be commercially made and not something that a farmer or blacksmith might have designed. So what do you think its purpose was? Does it have a name? Is it something regional in nature or would it have been used beyond the Midwest and High Plains?

Send your responses, including hometown, to terry.anderson@lee.net.

We’re always looking for more “What’s This?” items. You can send photos via email to that same address. Be sure to include as much information as you can. We’ll use some of the information as a clue for the object and more with the responses and results. Be sure to include your name, address and phone number, should we have questions.